The difference between the strip light

   At first, we look at the 2835 and 5730 together.

1,different appearance and dimension: model 2835/5730 refer to the shape size of the patch LED beads; 2835LED beads: long 2.8mm, wide 3.5mm ,thick 0.8mm.5730LED beads: long 5.7mm,wide 3.0mm,thick 0.9mm; They have different sizes and power, with different manufacturer standards. Therefore, many manufacturers control the lens source of LED lamp beads, package high thermal conductive silicon colloids, and timely adopt the most cutting-edge light decay control technology in Taiwan, so as to produce LED lamp beads with high lumens, high heat dissipation and low light decay.

2. Different heat dissipation structure:

2835 The patch LED bead adopts a unique LED heat dissipation structure, and the wafer is placed on the pin, which serves to the heat dissipation of the wafer node, and the wafer node temperature does not accumulate.Thus to ensure the service life and good use of LED beads, low light decay.In addition, the thermal resistance of 2835 patch LED beads is lower than similar products, tested at room temperature, and better than similar products.

3. Working positive voltage is different:

The rated voltage of conventional white light patch LED beads is 3.0-3.6V, and white light 2835 patch LED beads can be designed to use high voltage drives such as 6V/9V/12V/18V. Due to the special heat dissipation mode of 2835 patch LED beads, 2835 patch LED beads can reach 1.0W power, making 2835 patch LED beads widely used on LED solar lamps, bulb lamps, suction top lamps, panel lamps and other fixtures.

4. Different costs:

2835 patch LED bead wafer has special cooling technology, current can be used normally in 150mA, bead brightness of 40-70LM, relative to similar brightness products, higher flow, use less, from the overall lamp cost, 2835 patch LED beads have absolute advantages, while 2835 patch LED beads are much better than similar products, can completely surpass similar products.

造型


Post time: Oct-18-2021